Tag Archives: foredom

HIGH TORQUE – LX Motor+ EMX Control + 50c with 17 Chisels. Foredoms kit model K. 2252 is a pre-packed Chisel Wood Carving Kit includes the LX motor with the EMX table top speed control, the 50C Chisel Handpiece with 17 Chisels and a tube of Grease (see details below). The LX motor is a permanent magnet motor is specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. LXB ball bearing motors feature full power and torque from start-up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredoms drill presses. They also are well matched with the H. 15D Quick Change and Hammer Handpieces for stone setting. It comes equipped with a motor bale for hanging, and our standard 39 long key-tip inner shaft and outer sheath for connecting to any of Foredoms interchangeable, quick disconnect handpieces. Foredoms permanent magnet motors require the use of a C. Damage will result if the motor is connected to any other speed control. The EMX is a table top speed control, is constructed of heavy duty plastic with durable solid state electronics. It has a dial control for precise speed settings, as well as good repeatability of previous settings. EMX-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor’s shielded plug. For use with 115 Volt M. 5″ long, 5-7/8″ wide, 2-3/4 high. Control is interchangeable with Foredom’s C. Foredom’s 50C chisel handpiece gives a power assist to carving projects in all types of wood, plastic, and plaster. This handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. The easy to maintain chisel handpiece is recommended for use at low speed with Series TX and LX motors and in forward rotation only with Series SR motors. Handpiece attaches to any flex shaft machine with a standard key tip shaft. The Chisel Handpiece must be used only in the forward motor direction. Optimum Speed Range- 3,000-10,000 rpm. Operating Speed- 18,000 rpm. Handpiece Specifications: 6″ long, 1″ in diameter, 4.6 oz. After every 200 hours of use you should clean and lubricate this handpiece. The old grease must be cleaned off of the interior cam chamber and replaced with new lubricant. If you do not have Foredom Grease Part No. MS10008, it is available in our web store under Supplies and Parts – Lubrication- All Lubricants. Using the chisel handpiece with a dial speed control is easier than with a foot operated control. Table top dial controls are available separately and named below. Consider ordering a kit containing the chisel handpiece and dial speed control kit depends on motor -M. SR- that you have. Certain Foredom bench mounted flex shafts also come with dial controls built into their bases models M. 17 included in this Kit. With A-KC503, A-KC504, A-KC505, A-KC506, A-KC509, and A-KC510 chisels. 5pc Chisel Set AKHK560. With A-KC501, A-KC502, A-KC507, A-KC508, and A-KC511 chisels. 6pc Chisel Set AKHK570. With A-KC512, A-KC513, A-KC514, A-KC515, A-KC516, and A-KC517 chisels. For Domestic use – For International M. Item is brand new. Ships Ground – Box Weight 17 Lbs – Box Size 19″ x 13″ x 5. The item “Foredom Chisel Carving Kit K. 2252 Woodcarving LX Motor High Torque EMX Control” is in sale since Sunday, September 7, 2014. This item is in the category “Crafts\Home Arts & Crafts\Woodworking\Wood Carving Hand Tools”. The seller is “jetsinc” and is located in Bethel, Connecticut. This item can be shipped worldwide.

• Model: M.LX Prepacked WoodCarving Kit
• Country/Region of Manufacture: United States
• Type: Carving Chisel
• MPN: K.2252 Chisel Carving Kit
• Brand: Foredom