https://woodcarvingsculpture.com Wed, 29 Apr 2026 17:52:46 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://woodcarvingsculpture.com/2021/07/carving-duplicator-wood-large-capacity/ https://woodcarvingsculpture.com/2021/07/carving-duplicator-wood-large-capacity/#comments Thu, 01 Jul 2021 15:30:31 +0000 http://woodcarvingsculpture.com/2021/07/carving-duplicator-wood-large-capacity/













This is an amazing, three-axis carving duplicator. It is designed to allow you to duplicate a model of almost anything in wood. It was home-made years ago, by a guy who really knew what he was doing. The operation is very similar to the TerrcoF-200 Dupli-carver. If you look that up, you can get a good idea on how this works, and techniques to best use it. It is based on a router and stylus. As your stylus touches your model, the bit mounted in the router carves away the wood up to that point in space. You use smaller and smaller styli and cutters to get closer to the final form. The router and stylus move up and down and back and forth on a counterbalanced arm assembly, and left and right on a steel bar. They also swing in and out in an arc around that bar. The carving piece and model move on turntables that rotate 360 degrees, to carve the sides and back of your piece, if needed. The motion is made easy by a counterbalance under the table, and linear bearings on the rod. It can copy almost any 3D or flat object, small statuary, signs, furniture pieces, etc. Some sanding and hand carving may be needed at the end of this process, unless you are going for a rustic look. The router takes ¼ inch and smaller (with a collet) shafts only. The table top is 24 by 48, and 40 inches high. The carving capacity is huge; approximately 20 inches or so above the table, and probably 30 inches front to back, with the rotating platters. I have never tried to carve something this big, but the capacity is there. The table is on heavy-duty retractable wheels and moves easily around the shop. This thing is heavy and large, and will require some disassembly to move. How much disassembly depends on what size vehicle you bring. I can help you get it to your vehicle. Located near Harrisburg, PA. The item “Carving duplicator, wood, large capacity” is in sale since Wednesday, March 17, 2021. This item is in the category “Crafts\Home Arts & Crafts\Woodworking\Wood Carving Hand Tools”. The seller is “padraig51″ and is located in Mechanicsburg, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

]]> https://woodcarvingsculpture.com/2021/07/carving-duplicator-wood-large-capacity/feed/ 0 https://woodcarvingsculpture.com/2021/05/wood-carving-duplicator-carves-anything/ https://woodcarvingsculpture.com/2021/05/wood-carving-duplicator-carves-anything/#comments Tue, 25 May 2021 17:58:07 +0000 http://woodcarvingsculpture.com/2021/05/wood-carving-duplicator-carves-anything/









We’re happy to answer any questions, feel free to call. Model One, with cutting bits. This is an amazing tool that will allow you to carve identical pieces from an original, and do it efficiently and quickly. Made of welded steel construction, it is extremely rigid and stable… And built for a lifetime of use. This machine will carve objects up to 8 inches in diameter, and any length desired. Length can be easily extended! Ball bearing guides move effortlessly on steel shafts while a router fitted with a carbide bit does the cutting. A nylon tipped guide pin follows the contour of the original with surprising ease. A wonderful addition to fine hand craftsmanship, this duplicator will allow you to cut a duplicate from a blank block of wood that needs only a final sanding to be finished. 005 inch can be achieved. Simply a wonderful tool for the hands-on person who wants to do his own work. The turning mechanism allows for the rotation of the workpieces a full 360 degrees, in unison, then they can be locked solidly in position for carving with the twist of a knob. Cutting can be done in three dimensions effortlessly. Setup is accomplished in a matter of minutes on your own table… A piece of 3/4 plywood is fine. Comes with cutting bits, guide pins, instructions… All you need to supply is the table or plywood to mount the mechanism and the router and you can start carving. WE DO NOT SUPPLY THE ROUTER. Will carve objects up to 35 , with the standard length side rails, and this can be easily extended up to 7 Ft. With the construction of a simple sliding center panel of plywood (plans are included). A handle is lightly held by the operator and the cutting bit follows the detail of the original exactly while the operator makes passes back and forth (or side to side) to remove excess wood. Simple manual operation allows you to proceed at your own speed. Cutting bits are easily changed to suit the carving. A selection of carbide bits come with the machine, each one with a matching stylus. The Duplicator is very easy to operate and very forgiving… You just can’t make mistakes if you take it at a moderate pace. The best feature is that this duplicator will carve an unlimited number of items. Will carve new pistol grips superbly. Gunstocks, both rifle and shotgun, furniture parts, Ball and Claw chair legs, Guitar necks, architectural millwork, virtually anything that will fit within the dimensions of 8 diameter can be duplicated. Need a Duplicator to handle wider items up to 16 wide, or even wider? See our’Model Two’ on our website. This is not a lightweight hobby tool, but rather a superbly built machine for serious production work on a wide range of carved wood items. Usually ships within a few days. Want to ask some questions in person? Please call the shop and we’d be happy to talk about your needs and answer any questions. The item “Wood Carving Duplicator. Carves Anything” is in sale since Monday, July 6, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Lathes”. The seller is “carvermaster” and is located in Belen, New Mexico. This item can be shipped to United States.

• Machine Type: Combination Lathe
• MPN: Does Not Apply
• Treated Material: Wood
• Brand: Unbranded

]]> https://woodcarvingsculpture.com/2021/05/wood-carving-duplicator-carves-anything/feed/ 0 https://woodcarvingsculpture.com/2020/12/wood-carving-duplicator-for-big-router/ https://woodcarvingsculpture.com/2020/12/wood-carving-duplicator-for-big-router/#comments Sun, 27 Dec 2020 15:22:03 +0000 http://woodcarvingsculpture.com/2020/12/wood-carving-duplicator-for-big-router/









Carvermaster Manufacturers of Carving Duplicators. This is a fine machine for duplicating gunstocks, plus a wide range of other items. Will carve grips, Rifle stocks, shotgun stocks and forearms… Anything that will fit within the dimensions of 8 in diameter x any length. As it comes standard, it will carve up to 35 long, and the length can be easily extended. Carves chair legs, violin and cello necks, even guitar necks. 005 inch, will carve an item to where just a light sanding is needed to finish. Includes a nice selection of cutting bits, each with a stylus to match. Uses the Bosch 1617 Router, or the Porter Cable 690 series, or Dewalt 618. Feel free to call if you have questions, or particular requirements. See our site for a wide range of models to suit any needs that you might have. Feel free to call with your questions. The item “Wood Carving Duplicator- For Big Router” is in sale since Monday, May 25, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers”. The seller is “carvermaster” and is located in Belen, New Mexico. This item can be shipped to United States.

• Custom Bundle: No
• MPN: Does Not Apply
• Control: Manual
• Modified Item: No
• Machine Type: 3 Axis Router Machine
• UPC: Does not apply
• Non-Domestic Product: No
• Brand: Unbranded

]]> https://woodcarvingsculpture.com/2020/12/wood-carving-duplicator-for-big-router/feed/ 0 https://woodcarvingsculpture.com/2020/08/wood-duplicator-wood-craving-machine-northstar-carving-machine/ https://woodcarvingsculpture.com/2020/08/wood-duplicator-wood-craving-machine-northstar-carving-machine/#comments Thu, 27 Aug 2020 23:38:53 +0000 http://woodcarvingsculpture.com/2020/08/wood-duplicator-wood-craving-machine-northstar-carving-machine/






4 spindle 20 centers carve flat work or 3 Dimensional. Between centers 38L x 19 in diameter. Runs good complete with cutters. And miscellaneous spare parts. 10 L 68 D 56H. Apron 1400 Lbs1 hp motor. Parts still available from Terrco. The item “Wood Duplicator, Wood Craving Machine, Northstar Carving Machine” is in sale since Friday, July 19, 2019. This item is in the category “Crafts\Home Arts & Crafts\Woodworking\Wood Carving Hand Tools”. The seller is “catsandcrinolines” and is located in Angels Camp, California. This item can’t be shipped, the buyer must pick up the item.

]]> https://woodcarvingsculpture.com/2020/08/wood-duplicator-wood-craving-machine-northstar-carving-machine/feed/ 0 https://woodcarvingsculpture.com/2020/08/vintage-reconditioned-dumore-carvit-wood-duplicator-carving-machine/ https://woodcarvingsculpture.com/2020/08/vintage-reconditioned-dumore-carvit-wood-duplicator-carving-machine/#comments Thu, 06 Aug 2020 08:01:18 +0000 http://woodcarvingsculpture.com/2020/08/vintage-reconditioned-dumore-carvit-wood-duplicator-carving-machine/












Vintage & Reconditioned DUMORE CARVIT Wood Duplicator Carving Machine in great condition. This item was reconditioned – repainted, new power cord and plug installed, and reconditioned wood base. Contact me for extra cost if you want this item insured. All checks require two weeks processing time from the time received. FEEL FREE TO CONTACT ME. Thank You for your time and consideration. The item “Vintage & Reconditioned DUMORE CARVIT Wood Duplicator Carving Machine” is in sale since Tuesday, December 3, 2019. This item is in the category “Crafts\Home Arts & Crafts\Woodworking\Wood Carving Hand Tools”. The seller is “member59666″ and is located in Brainerd, Minnesota. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

• Model: Carvit
• Brand: Dumore

]]> https://woodcarvingsculpture.com/2020/08/vintage-reconditioned-dumore-carvit-wood-duplicator-carving-machine/feed/ 0 https://woodcarvingsculpture.com/2020/07/northstar-wood-duplicator-carving-machine/ https://woodcarvingsculpture.com/2020/07/northstar-wood-duplicator-carving-machine/#comments Sat, 04 Jul 2020 02:51:04 +0000 http://woodcarvingsculpture.com/2020/07/northstar-wood-duplicator-carving-machine/







Used Wood Duplicator, Northstar Carving Machine. The machine functions and works well and is in great shape. As shown in the photos this is a 2 head machine the motors 1/2hp. With the sale comes the carving bits (photos) and has the work tables/hold down clamps, also has the rotating axis. Im located in Easton PA local pick only. The item “Northstar Wood Duplicator, Carving Machine” is in sale since Friday, April 3, 2020. This item is in the category “Crafts\Home Arts & Crafts\Woodworking\Wood Carving Hand Tools”. The seller is “maltay9″ and is located in Easton, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

]]> https://woodcarvingsculpture.com/2020/07/northstar-wood-duplicator-carving-machine/feed/ 0 https://woodcarvingsculpture.com/2020/06/wood-carving-duplicator-large-bosch-router-setup/ https://woodcarvingsculpture.com/2020/06/wood-carving-duplicator-large-bosch-router-setup/#comments Mon, 22 Jun 2020 22:47:42 +0000 http://woodcarvingsculpture.com/2020/06/wood-carving-duplicator-large-bosch-router-setup/









We’re happy to answer any questions, feel free to call. This is an amazing tool that will allow you to carve identical pieces from an original, and do it efficiently and quickly. Made of welded steel construction, it is extremely rigid and stable… And built for a lifetime of use. This machine will carve objects up to 8 inches in diameter, and any length desired. Length can be easily extended! Ball bearing guides move effortlessly on steel shafts while a router fitted with a carbide bit does the cutting. A nylon tipped guide pin follows the contour of the original with surprising ease. A wonderful addition to fine hand craftsmanship, this duplicator will allow you to cut a duplicate from a blank block of wood that needs only a final sanding to be finished. 005 inch can be achieved. Simply a wonderful tool for the hands-on person who wants to do his own work. The turning mechanism allows for the rotation of the workpieces a full 360 degrees, in unison, then they can be locked solidly in position for carving with the twist of a knob. Cutting can be done in three dimensions effortlessly. Setup is accomplished in a matter of minutes on your own table… A piece of 3/4 plywood is fine. Comes with cutting bits, guide pins, instructions… All you need to supply is the table or plywood to mount the mechanism and the router and you can start carving. WE DO NOT SUPPLY THE ROUTER. The machine is set up for the Bosch 1617 router, and will also fit the Porter Cable 690 series or the Dewalt 618. Will carve objects up to 35 , with the standard length side rails, and this can be easily extended up to 7 Ft. With the construction of a simple sliding center panel of plywood (plans are included). A handle is lightly held by the operator and the cutting bit follows the detail of the original exactly while the operator makes passes back and forth (or side to side) to remove excess wood. Simple manual operation allows you to proceed at your own speed. Cutting bits are easily changed to suit the carving. A selection of carbide bits come with the machine, each one with a matching guide pin. The Duplicator is very easy to operate and very forgiving… You just can’t make mistakes if you take it at a moderate pace. The best feature is that this duplicator will carve an unlimited number of items. Canoe Paddles to Fishing Lures, and everything in between. Virtually anything that will fit within the dimensions of 8 diameter can be duplicated. Need a Duplicator to handle wider items up to 16 wide, or even wider? See our’Model Two’ on our website. This is not a lightweight hobby tool, but rather a superbly built machine for serious production work on a wide range of carved wood items. Usually ships within a few days. Want to ask some questions in person? Please call the shop and we’d be happy to talk about your needs and answer any questions. C0m Look us up on the web. The item “-Wood Carving Duplicator- Large Bosch Router setup” is in sale since Friday, February 22, 2019. This item is in the category “Sporting Goods\Hunting\Gun Smithing & Maintenance\Smithing Equipment”. The seller is “carvermaster” and is located in Belen, New Mexico. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: Unbranded

]]> https://woodcarvingsculpture.com/2020/06/wood-carving-duplicator-large-bosch-router-setup/feed/ 0 https://woodcarvingsculpture.com/2020/05/wood-carving-duplicator-need-more-than-a-lathe/ https://woodcarvingsculpture.com/2020/05/wood-carving-duplicator-need-more-than-a-lathe/#comments Wed, 27 May 2020 22:22:21 +0000 http://woodcarvingsculpture.com/2020/05/wood-carving-duplicator-need-more-than-a-lathe/









We’re happy to answer any questions, feel free to call. With Special Cutting Bits. This is an amazing tool that will allow you to carve identical pieces from an original, and do it efficiently and quickly. Made of welded steel construction, it is extremely rigid and stable… And built for a lifetime of use. This machine will carve objects up to 8 inches in diameter, and any length desired. Length can be easily extended! Ball bearing guides move effortlessly on steel shafts while a router fitted with a carbide bit does the cutting. A nylon tipped guide pin follows the contour of the original with surprising ease. A wonderful addition to fine hand craftsmanship, this duplicator will allow you to cut a duplicate from a blank block of wood that needs only a final sanding to be finished. 005 inch can be achieved. Comes with a Lifetime Guarantee. Simply a wonderful tool for the hands-on person who wants to do his own work. The turning mechanism allows for the rotation of the workpieces a full 360 degrees, in unison, then they can be locked solidly in position for carving with the twist of a knob. Cutting can be done in three dimensions effortlessly. Setup is accomplished in a matter of minutes on your own table… A piece of 3/4 plywood is fine. Comes with cutting bits, guide pins, instructions… All you need to supply is the table or plywood to mount the mechanism and the router and you can start carving. WE DO NOT SUPPLY THE ROUTER. Will carve objects up to 35 , with the standard length side rails, and this can be easily extended up to 7 Ft. With the construction of a simple sliding center panel of plywood (plans are included). A handle is lightly held by the operator and the cutting bit follows the detail of the original exactly while the operator makes passes back and forth (or side to side) to remove excess wood. Simple manual operation allows you to proceed at your own speed. Cutting bits are easily changed to suit the carving. A selection of carbide bits come with the machine, each one with a matching stylus. The Duplicator is very easy to operate and very forgiving… You just can’t make mistakes if you take it at a moderate pace. The best feature is that this duplicator will carve an unlimited number of items. Will carve new pistol grips superbly. Gunstocks, both rifle and shotgun, furniture parts, Ball and Claw chair legs, Guitar necks, architectural millwork, virtually anything that will fit within the dimensions of 8 diameter can be duplicated. Need a Duplicator to handle wider items up to 16 wide, or even wider? See our’Model Two’ on our website. This is not a lightweight hobby tool, but rather a superbly built machine for serious production work on a wide range of carved wood items. Usually ships within a few days. Want to ask some questions in person? Please call the shop and we’d be happy to talk about your needs and answer any questions. The item “-Wood Carving Duplicator- Need More than a Lathe” is in sale since Monday, October 22, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Lathes”. The seller is “carvermaster” and is located in Belen, New Mexico. This item can be shipped to United States.

• Non-Domestic Product: No
• Modified Item: No
• Custom Bundle: No
• MPN: Does Not Apply
• Brand: Unbranded

]]> https://woodcarvingsculpture.com/2020/05/wood-carving-duplicator-need-more-than-a-lathe/feed/ 0 https://woodcarvingsculpture.com/2020/05/used-wood-duplicator-northstar-carving-machine/ https://woodcarvingsculpture.com/2020/05/used-wood-duplicator-northstar-carving-machine/#comments Sat, 16 May 2020 01:42:17 +0000 http://woodcarvingsculpture.com/2020/05/used-wood-duplicator-northstar-carving-machine/






4 spindle 20 centers carve flat work or 3 Dimensional. Between centers 38L x 19 in diameter. Runs good complete with cutters. And miscellaneous spare parts. 10 L 68 D 56H. Apron 1400 Lbs1 hp motor. Parts still available from Terrco. The item “Used Wood Duplicator, Northstar Carving Machine” is in sale since Thursday, March 7, 2019. This item is in the category “Crafts\Home Arts & Crafts\Woodworking\Wood Carving Hand Tools”. The seller is “catsandcrinolines” and is located in Angels Camp, California. This item can’t be shipped, the buyer must pick up the item.

]]> https://woodcarvingsculpture.com/2020/05/used-wood-duplicator-northstar-carving-machine/feed/ 0