https://woodcarvingsculpture.com Mon, 04 May 2026 18:06:39 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://woodcarvingsculpture.com/2021/12/3000mw-laser-engraving-machine-diy-logo-mark-printer-cutter-for-wood-pvc-carving/ https://woodcarvingsculpture.com/2021/12/3000mw-laser-engraving-machine-diy-logo-mark-printer-cutter-for-wood-pvc-carving/#comments Fri, 24 Dec 2021 09:13:51 +0000 https://woodcarvingsculpture.com/2021/12/3000mw-laser-engraving-machine-diy-logo-mark-printer-cutter-for-wood-pvc-carving/







3000mw High Speed Laser Engraving Machine USB DIY Carving Handicraft Wood Engraver. What kind of material this machine can be use? This laser engraving machine is not available for the following materials. Metals (regardless of thickness), stone, ceramics, jewelery, reflective material, colorless, transparent materials, soft materials. Working area : 8080 mm. Machine materialABS(Acrylonitrile Butadiene Styrene plastic) + Aluminium alloy. Software: Self-developed software, easy to operate. Positioning Accuracy: 0.01mm. Hanging Engraving Height Limitation: 3-80cm / 1.18-31.50inch. Engraved Object Size Limitation: No Limitation. Engraving Depth: 1mm(01 adjustable). Max Image Size: 1070 1070 pixels. Image Engraving Pattern: Bitmap Carving. Laser Can Be Replaced: YES. Continuous Working Time: 10 hour. Picture format: JPG / GIF / BMP / DIB / ICO / CUR /PNG. Machine Size: 15.5 x 16.6 x 14.3 cm / 6.10 6.54 5.63in. 26 22.7 19.2cm / 10.24 8.94 7.56in. 1360g / 47.97oz. The software is easy to use, free upgrades. Software supports windows-97/03/7/8/10 Windows Vista / XP Unix, Linux, Macbook are not supported. Do not point the laser head at eyes of human or animals directly. The machine needs rest after running for around 30 minutes. It can not engrave metal, glass, crystal and any other translucent material. It should not be stopped while running, or else it might be damaged. Not suitable for kids under 14. Software, user manual and some pictures in the USB disk is for your use. The color of carving is determined by material, usually black. This laser engraving machine is just suitable for DIY, but not for industrial application. If you need EU, UK, or AU plug, please leave us a note with the order, otherwise we will sent the US plug. 1 x Laser engraver (with 1pc 3000mW laser). 1 x USB disk. 1 x Screw driver. 4 x Screw caps. 1 x Power cord. 1 x USB cable. 2 x Wooden boards. We will respond to you within 24 hours and do our best to help you out! (because it is most secure method for both of buyers and sellers). When you didn’t receive your package or the parcel is damaged, or have the defective products, please provide us some pictures as a evidence. We hope you are satisfied with the product and look forward doing business with you again. If u have Any Problem Please Cantact us, We are always ready to resolve your every problems about this deal. The item “3000MW Laser Engraving Machine DIY Logo Mark Printer Cutter For Wood PVC Carving” is in sale since Thursday, November 26, 2020. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving”. The seller is “deasyone” and is located in Shanghai. This item can be shipped worldwide.

• Modified Item: No
• Country/Region of Manufacture: China
• Machine Operation: Computer Numerical Control (CNC)
• Application Shape: Square
• Custom Bundle: No
• Material: Wood
• Engraving Application: Metals (regardless of thickness), stone, ceramics,
• Type: Engraving Machine
• Tool Type: Engraving Liner
• Engraving Method: Laser
• MPN: Does Not Apply
• Power: 3000mw
• Brand: Twowinn

]]> https://woodcarvingsculpture.com/2021/12/3000mw-laser-engraving-machine-diy-logo-mark-printer-cutter-for-wood-pvc-carving/feed/ 0 https://woodcarvingsculpture.com/2021/10/80w-24x40-co2-laser-engraver-cutter-cutting-engraving-carving-machine-ruida/ https://woodcarvingsculpture.com/2021/10/80w-24x40-co2-laser-engraver-cutter-cutting-engraving-carving-machine-ruida/#comments Fri, 22 Oct 2021 13:58:11 +0000 http://woodcarvingsculpture.com/2021/10/80w-24x40-co2-laser-engraver-cutter-cutting-engraving-carving-machine-ruida/











80W 24″x40″ CO2 Laser Engraver Cutter Cutting Engraving Carving Machine Ruida. OMTech 80W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 24″x40″ Workbed (ZF2440-80). Our Mid-Range CO2 Laser Engravers known for efficient engraving speeds and considerable cutting capabilities. Ranging from 50W to 80W, these laser engraving machines engrave effectively and cut through 6 mm to 9 mm. 35 thick plywood and acrylic. Start your laser engraving journey with a Mid-Range laser engraver by OMTech! Dual Laser Tube & Power Supply. Free CW5202 Water Chiller. DOUBLE YOUR EFFICIENCY: Equipped with two 80W laser tubes and two laser heads to engrave two sections at once, effectively doubling your production speed. Its perfect for professional applications where work efficiency is a top priority. RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs. LCD DISPLAY: A secondary display panel monitors the real-time electric current in milliamps and auto-judges fault, easing the troubleshooting process and reducing potential damage to the laser tube and power supply. Plus, its accessibly located on the left side of the machine. LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life. MOTORIZED Z-AXIS: An electric lift powers the workbed’s ascent/descent function, allowing effortless platform height adjustment to accommodate bulky objects and help you focus the laser head. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, its equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machines path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 6070°F (1621°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the Enter button to continue operation. EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machines cleanliness and easing the cleanup process. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood , Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. FDA , CE , ISO9001, EN ISO 11553-1 IEC 60825-1 Certification. CLASS 1 LASER PRODUCT. Thank you very much! If you must modify your. This item comes with. Laser tube and power supply. Special circumstances will be stated clearly in the listing. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it’s the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you. Please submit all enquires via the Ask a Question tab, located at the bottom of this page. The item “80W 24×40 CO2 Laser Engraver Cutter Cutting Engraving Carving Machine Ruida” is in sale since Thursday, August 1, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving”. The seller is “seriouswholesaler” and is located in Ontario, California. This item can be shipped to United States.

• Brand: OMTech
• MPN: ZF2440-80
• Engraving Method: Laser
• Type: Engraving Machine
• Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
• Engraving Application: Gift Personalization, Housegoods, Office Signage, Plaque, Signs
• Name Tag Style: Badge
• Power: 80 W
• Machine Operation: Computerized
• Model: SH-G1060
• Laser Power Supply: 110V/60Hz AC
• Engraving/Cutting Area: 24 × 40 (60×100 cm)
• Engraving/Cutting Thickness: 0 (015 mm)depends on materials
• Workbench Adjustment: Electric
• Workbed Adjustable Height: 5.9 in. (015 cm)
• Max. Engraving Speed: 23.6 in./sec. (60 cm/s)
• Max. Cutting Speed: 15.75 in./sec. (40 cm/s)
• Graphic Operating Modes: Optimized Raster, Vector, and Combined
• Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
• Net Weight: 573 lb. (260 kg)
• Machine Size: 63×48.8×39.4 in. (160×124×100 cm)
• Rated Power: 80W
• Laser Tube Model: Yongli H2
• Laser Wavelength: 10.60 m
• Laser Type: Class 1
• Laser Tube Diameter: 2.36 in. (60 mm)
• Laser Tube Length: 49.2 in. (1250 mm)
• Laser Tube Warranty Time: 12 Month
• Exp. Service Life at <40% / 4070% / >70% Power: 1100012000/800010000/45005000 hr.
• Focal lens Dia: 20 mm
• Focal lens FL: 2.5 in.
• Mo mirror Dia: 25mm

]]> https://woodcarvingsculpture.com/2021/10/80w-24x40-co2-laser-engraver-cutter-cutting-engraving-carving-machine-ruida/feed/ 0 https://woodcarvingsculpture.com/2021/10/omtech-28x20-60w-co2-laser-engraver-cutter-cutting-engraving-carving-machine/ https://woodcarvingsculpture.com/2021/10/omtech-28x20-60w-co2-laser-engraver-cutter-cutting-engraving-carving-machine/#comments Thu, 21 Oct 2021 13:50:30 +0000 http://woodcarvingsculpture.com/2021/10/omtech-28x20-60w-co2-laser-engraver-cutter-cutting-engraving-carving-machine/













OMTech 28″x20″ 60W CO2 Laser Engraver Cutter Cutting Engraving Carving Machine. Create professional-scale engravings with our 60W water-cooled CO2 laser engraving machine. Its great for almost any smooth surface (except metal) and features red dot guidance for effortless project setup and more precise results. With advanced Raster/Vector Color Mapping technology, the device can switch processing power and speed for multi-shade images, plus, the reinforced body allows for safe transport and an extended lifespan. The Rotary Axis Attachment enables engraving on cylindrical objects like glass cups. Equipped with a high-precision stepper motor and digital LCD Ruida control board, it features an expanded engraving surface (28 x 20) with a height-adjusting lift table, making it one of the most highly capable machines in our extensive line of engraving tools. Simply plug in the USB connector to your computer system and youre ready to start your laser engraving story! OMTech 60W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20″x28″ Workbed (MF2028-60). Our Mid-Range CO2 Laser Engravers known for efficient engraving speeds and considerable cutting capabilities. Ranging from 50W to 80W, these laser engraving machines engrave effectively and cut through 6 mm to 9 mm. 35 thick plywood and acrylic. Start your laser engraving journey with a Mid-Range laser engraver by OMTech! Honeycomb and Knife Beds. Digital Laser Power Supply. Free Rotary Axis A. RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs. LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, its equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machines path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. TWO-WAY PASS-THROUGH: Theres always extra room! Equipped with 29″W x 3.75″H front and rear pass-through doors to accommodate materials larger than the workbed size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 6070°F (1621°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the Enter button to continue operation. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood , Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. FDA , CE , ISO9001, EN ISO 11553-1 IEC 60825-1 Certification. CLASS 1 LASER PRODUCT. Thank you very much! If you must modify your. This item comes with. Laser tube and power supply. Special circumstances will be stated clearly in the listing. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it’s the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you. The item “OMTech 28×20 60W CO2 Laser Engraver Cutter Cutting Engraving Carving Machine” is in sale since Thursday, May 16, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving”. The seller is “acautoparts04″ and is located in Ontario, California. This item can be shipped to United States.

• Brand: OMTech
• MPN: MF2028-60
• Engraving Method: Laser
• Type: Engraving Machine
• Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
• Engraving Application: Gift Personalization, Housegoods, Office Signage, Plaque, Signs
• Name Tag Style: Badge
• Power: 60 W
• Machine Operation: Computerized
• Model: SH-G570
• Laser Power Supply: 110V/60Hz AC
• Engraving/Cutting Area: 20 × 28 (50×70 cm)
• Engraving/Cutting Thickness: 0 (010 mm)depends on materials
• Workbench Adjustment: Manual
• Workbed Adjustable Height: 9.1 in. (023 cm)
• Max. Engraving Speed: 23.6 in./sec. (60 cm/s)
• Max. Cutting Speed: 15.75 in./sec. (40 cm/s)
• Graphic Operating Modes: Optimized Raster, Vector, and Combined
• Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
• Net Weight: 331 lb(150 kg)
• Machine Size: 47×34×36.6 in. (120×87×93 cm)
• Laser Tube Model: OMTech 60W
• Laser Wavelength: 10.60 m
• Laser Type: Class 1
• Laser Tube Diameter: 2.16 in. (55 mm)
• Laser Tube Length: 39.4 in. (1000 mm)
• Laser Tube Warranty Time: 6 Month
• Exp. Service Life at <40% / 4070% / >70% Power: 17002000/13001500/8001000 hr.
• Focal lens Dia:: 18 mm
• Focal lens FL: 2.5 in.
• Mo mirror Dia: 25mm

]]> https://woodcarvingsculpture.com/2021/10/omtech-28x20-60w-co2-laser-engraver-cutter-cutting-engraving-carving-machine/feed/ 0 https://woodcarvingsculpture.com/2021/10/28x20-60w-co2-laser-engraver-cutter-cutting-engraving-carving-ruida-autofocus/ https://woodcarvingsculpture.com/2021/10/28x20-60w-co2-laser-engraver-cutter-cutting-engraving-carving-ruida-autofocus/#comments Wed, 20 Oct 2021 13:38:31 +0000 http://woodcarvingsculpture.com/2021/10/28x20-60w-co2-laser-engraver-cutter-cutting-engraving-carving-ruida-autofocus/













28″x20″ 60W CO2 Laser Engraver Cutter Cutting Engraving Carving Ruida Autofocus. OMTech 60W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20″x28″ Workbed (AF2028-60). Our Mid-Range CO2 Laser Engravers known for efficient engraving speeds and considerable cutting capabilities. Ranging from 50W to 80W, these laser engraving machines engrave effectively and cut through 6 mm to 9 mm. 35 thick plywood and acrylic. Start your laser engraving journey with a Mid-Range laser engraver by OMTech! Honeycomb and Knife Beds. RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs. LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life. MOTORIZED AUTOFOCUS WORKBED: The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, its equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machines path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. TWO-WAY PASS-THROUGH: Theres always extra room! Equipped with 29″W x 3.75″H front and rear pass-through doors to accommodate materials larger than the workbed size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 6070°F (1621°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the Enter button to continue operation. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood , Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. FDA , CE , ISO9001, EN ISO 11553-1 IEC 60825-1 Certification. CLASS 1 LASER PRODUCT. Thank you very much! If you must modify your. This item comes with. Laser tube and power supply. Special circumstances will be stated clearly in the listing. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it’s the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you. The item “28×20 60W CO2 Laser Engraver Cutter Cutting Engraving Carving Ruida Autofocus” is in sale since Thursday, November 1, 2018. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving”. The seller is “globalfreeshipping” and is located in Memphis, Tennessee. This item can be shipped to United States.

• Brand: OMTech
• MPN: AF2028-60
• Engraving Method: Laser
• Type: Engraving Machine
• Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
• Engraving Application: Gift Personalization, Housegoods, Office Signage, Plaque, Signs
• Name Tag Style: Badge
• Power: 60 W
• Machine Operation: Computerized
• Model: SH-G570
• Laser Power Supply: 110V/60Hz AC
• Engraving/Cutting Area: 20 × 28 (50×70 cm)
• Engraving/Cutting Thickness: 0 (010 mm)depends on materials
• Workbench Adjustment: Electric
• Workbed Adjustable Height: 9.1 in. (023 cm)
• Max. Engraving Speed: 23.6 in./sec. (60 cm/s)
• Max. Cutting Speed: 15.75 in./sec. (40 cm/s)
• Graphic Operating Modes: Optimized Raster, Vector, and Combined
• Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
• Net Weight: 331 lb. (150 kg)
• Machine Size: 47×34×36.6 in. (120×87×93 cm)
• Rated Power: 60W
• Laser Tube Model: OMTech 60W
• Laser Wavelength: 10.60 m
• Laser Type: Class 1
• Laser Tube Diameter: 2.16 in. (55 mm)
• Laser Tube Length: 39.4 in. (1000 mm)
• Laser Tube Warranty Time: 6 Month
• Exp. Service Life at <40% / 4070% / >70% Power: 17002000/13001500/8001000 hr.
• Focal lens Dia: 18 mm
• Focal lens FL: 2.5 in.
• Mo mirror Dia: 25mm

]]> https://woodcarvingsculpture.com/2021/10/28x20-60w-co2-laser-engraver-cutter-cutting-engraving-carving-ruida-autofocus/feed/ 0 https://woodcarvingsculpture.com/2021/10/co2-laser-engraving-cutting-carving-engraver-cutter-ruida-omtech-28x20-60w/ https://woodcarvingsculpture.com/2021/10/co2-laser-engraving-cutting-carving-engraver-cutter-ruida-omtech-28x20-60w/#comments Tue, 19 Oct 2021 12:32:01 +0000 http://woodcarvingsculpture.com/2021/10/co2-laser-engraving-cutting-carving-engraver-cutter-ruida-omtech-28x20-60w/











CO2 laser Engraving Cutting Carving Engraver Cutter Ruida Omtech 28″x20″ 60W. OMTech 60W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20″x28″ Workbed (MF2028-60). Our Mid-Range CO2 Laser Engravers known for efficient engraving speeds and considerable cutting capabilities. Ranging from 50W to 80W, these laser engraving machines engrave effectively and cut through 6 mm to 9 mm. 35 thick plywood and acrylic. Start your laser engraving journey with a Mid-Range laser engraver by OMTech! Honeycomb and Knife Beds. Digital Laser Power Supply. RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs. LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, its equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machines path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. TWO-WAY PASS-THROUGH: Theres always extra room! Equipped with 29″W x 3.75″H front and rear pass-through doors to accommodate materials larger than the workbed size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 6070°F (1621°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the Enter button to continue operation. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood , Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. FDA , CE , ISO9001, EN ISO 11553-1 IEC 60825-1 Certification. CLASS 1 LASER PRODUCT. Thank you very much! If you must modify your. This item comes with. Laser tube and power supply. Special circumstances will be stated clearly in the listing. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it’s the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you. The item “CO2 laser Engraving Cutting Carving Engraver Cutter Ruida Omtech 28×20 60W” is in sale since Thursday, November 19, 2020. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving”. The seller is “orionmotortech” and is located in Anaheim, California. This item can be shipped to United States.

• Brand: OMTech
• MPN: MF2028-60
• Engraving Method: Laser
• Type: Engraving Machine
• Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
• Engraving Application: Gift Personalization, Housegoods, Office Signage, Plaque, Signs
• Name Tag Style: Badge
• Power: 60 W
• Machine Operation: Computerized
• Model: SH-G570
• Laser Power Supply: 110V/60Hz AC
• Engraving/Cutting Area: 20 × 28 (50×70 cm)
• Engraving/Cutting Thickness: 0 (010 mm)depends on materials
• Workbench Adjustment: Manual
• Workbed Adjustable Height: 9.1 in. (023 cm)
• Max. Engraving Speed: 23.6 in./sec. (60 cm/s)
• Max. Cutting Speed: 15.75 in./sec. (40 cm/s)
• Graphic Operating Modes: Optimized Raster, Vector, and Combined
• Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
• Net Weight: 331 lb(150 kg)
• Machine Size: 47×34×36.6 in. (120×87×93 cm)
• Laser Tube Model: OMTech 60W
• Laser Wavelength: 10.60 m
• Laser Type: Class 1
• Laser Tube Diameter: 2.16 in. (55 mm)
• Laser Tube Length: 39.4 in. (1000 mm)
• Laser Tube Warranty Time: 6 Month
• Exp. Service Life at <40% / 4070% / >70% Power: 17002000/13001500/8001000 hr.
• Focal lens Dia:: 18 mm
• Focal lens FL: 2.5 in.
• Mo mirror Dia: 25mm

]]> https://woodcarvingsculpture.com/2021/10/co2-laser-engraving-cutting-carving-engraver-cutter-ruida-omtech-28x20-60w/feed/ 0 https://woodcarvingsculpture.com/2021/09/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser-3/ https://woodcarvingsculpture.com/2021/09/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser-3/#comments Sun, 26 Sep 2021 17:26:21 +0000 http://woodcarvingsculpture.com/2021/09/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser-3/













Spindle Motor and Inverter. Sports & Outdoors Kits. Steam Generator for Bath. Welding and Polishing Machine. NOT for sale for Winit and 4PX. You may also like. CNC 3018-MX3 Engraving Machine Mini DIY Wood Router GRBL Control w/ 500mw Laser. 2417 Desktop Mini Engraving Machine CNC Milling Engraver Router PCB Woodwork DIY. Inside Ring Engraving Machine Inner Side Ring Engraver 2 Letter Block Dial Fonts. 2419 GRBL Laser Engraving Machine Wood Cutter DIY Carving Machine 500mw Laser. This DIY desktop blue laser engraving machine is ideal for amateur laser engraving usage. It only need you to connect it to the computer, then you can print any pictures your like with your own creativity. Make of High quality aluminum alloy, Perfect gift for engraving DIY Artist. Engravable materials: light wood board, cardboard, kraft paper, cotton cloth, solid wood, bamboo, acrylic, etc. Cuttable materials: non-woven fabric, canvas, leather, etc. DIY CNC laser engraving machine- 500mw DIY desktop blue laser engraving machine, engraving and cutting. 240×190mm laser engraver area. Precise positioning Laser Engraver- 0.01mm Positioning Accuracy, Cross red light emitter assisted positioning, Low-damper rail modules and high-quality stepper motors ensure higher accuracy and better stability. High Power Laser Module Engraver- Blue purple light 500mw laser power engraving machine. High integration and good heat dissipation, Prolonging it using life greatly. Adjustable laser power, achieve all kinds of effects. EASY TO USE Laser Engraver- Compatible with Windows XP, WIN 7, WIN 8 and WIN10. Support offline function, you can customize the engraving pattern in batches. Laser power: Blue purple light 500mw. Main body material: Aluminum Alloy. Machine size: 350×285×195mm (13.8×11.2×7.7). Working arear: 240×190mm (9.5×7.5). Control system: GRBL (all software which support GRBL, include GRBLControl, grblcontroller, Universal, GcodSendeer), also support weidiao master. Applicable to WinXP, Win7, Win8, Win10. Gross weight: 4.1kg. Please wear the protective glass when you use the laser module. Do not touching the laser light directly in case that hurt the body and skin. Keep children and pets away from the laser module when it working. Please DO NOT disassemble the laser module without our permission, or it might cause the damage. 1 × Engraving machine. 1 × Protective Glasses. 1 × Power Adapter. California Warehouse: City of Industry, CA. Texas Warehouse: Houston, TX. Kentucky Warehouse: Hebron, KY. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. The item “2419 GRBL Laser Engraving Machine Wood Cutter DIY Carving Machine 500mw Laser” is in sale since Monday, June 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers”. The seller is “loveshoppingjxts” and is located in Los Angeles. This item can be shipped worldwide.

• Applicable to: WinXP, Win7, Win8, Win10
• Brand: TaiShi
• Control: CNC
• Control system: GRBL
• Country/Region of Manufacture: China
• Gross weight: 4.5kg
• Input voltage: 12V
• Laser power: Blue purple light 500mw
• Machine size: 350×285×195mm (13.8×11.2×7.7″)
• Machine Type: Engraver Machine
• Main body material: Aluminum Alloy
• MPN: MG2020060427
• Working arear: 240×190mm (9.5×7.5″)

]]> https://woodcarvingsculpture.com/2021/09/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser-3/feed/ 0 https://woodcarvingsculpture.com/2021/07/cnc-3018-pro-diy-wood-engraving-machine-full-set-cutter-min-carving-machine-24v/ https://woodcarvingsculpture.com/2021/07/cnc-3018-pro-diy-wood-engraving-machine-full-set-cutter-min-carving-machine-24v/#comments Sat, 17 Jul 2021 17:20:01 +0000 http://woodcarvingsculpture.com/2021/07/cnc-3018-pro-diy-wood-engraving-machine-full-set-cutter-min-carving-machine-24v/













Dear customers, We are always working hard to ensure that orders are delivered on time. But inevitably there will be a very small number of orders may be delayed due to the worsening of the epidemic. Thank you for your support! (Comes with plug adapter according to your country). Spindle Motor, Control Board, Z A xis Set, Stepper Motors, and other Assemble Parts are all included. This machine is a learning kit for beginners. The whole set of parts is hands-on, and it is equipped with an installation course. After receiving the goods, it is requested to ask the shopkeeper. He automatically engraving (laser engraving we have special software to directly import pictures). The software that generates G code requires a lot of users to learn, and we provide tutorials and learning materials. Windows XP , Win7, Win8, Win10. 3 A xis Movable, Adjustable Speed Spindle Motor 3. Engrave Wood, Plastic, Acrylic, PCB, or Similar Material Can Not Engrave Metal, Steel, Aluminum. 42 Stepper Motor, Voltage: 12V, Phase Current 1.3A, Torque 0.25N. 775 Spindle Motor (12-36V) 24V: 10000r/min, 36V: 12000r/min. Assembly requires a certain mechanical skill. All assembly components are included. Engraving Materials: The machine can carve wood, plastic, acrylic, PCB, or the like materials. Can Not Engrave: Hard metal (such as brass, steel, iron, etc), jade and other very hard texture items. Instructions & Software: Assembly instructions, control software and further information please ask the shopkeeper. This item contains the spindle motor, but no laser module. Thanks for your understanding, and please note that the input interface (Should be XH2.54-3P or XH2.54-2P) and input voltage (Should be DC 12V) of the laser module should be compatible with the control board on 3018. Besides, the original motor holder is round, please make sure the shape of your laser module is suitable for installation. Please allow 1-3cm error due to manual measurement. The colors may have different as the difference display, please understand. The item “CNC 3018 PRO DIY Wood Engraving Machine Full Set Cutter Min Carving Machine 24V” is in sale since Friday, June 25, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers”. The seller is “chaoshansoup” and is located in Altadena, California. This item can be shipped to United States, Canada, Mexico.

• Brand: Unbranded/Generic
• MPN: GKi9911799
• Control: CNC
• Machine Type: 3 Axis Router Machine
• Power Source: Electric
• Model Year: 2021
• Custom Bundle: No
• Country/Region of Manufacture: China
• Frame Material: Aluminum Alloy, Bakelite
• Working Area: Approx. 300 * 180 * 40mm
• Adapter Plug: 2-Pin US Plug
• Adapter Input Voltage: AC 110-240V 50/60Hz
• Feature 1: DURABLE ALUMINUM PROFILES
• Feature 2: UPGRADED THREE AXES
• Feature 3: GRBL & OFFLINE CONTROL
• Feature 4: HIGH-SPEED MOTORS
• Feature 5: EFFORTLESS OPERATION
• Manufacturer Part Number: GKi9911799

]]> https://woodcarvingsculpture.com/2021/07/cnc-3018-pro-diy-wood-engraving-machine-full-set-cutter-min-carving-machine-24v/feed/ 0 https://woodcarvingsculpture.com/2020/12/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser-2/ https://woodcarvingsculpture.com/2020/12/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser-2/#comments Mon, 14 Dec 2020 02:58:05 +0000 http://woodcarvingsculpture.com/2020/12/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser-2/













Ballscrew & Linear rail. Packing & Filling Machine. Small Item in DE. Small Item in US. Small Item in UK. 2419 GRBL Laser Engraving Machine Wood Cutter DIY Carving Machine 500mw Laser. This DIY desktop blue laser engraving machine is ideal for amateur laser engraving usage. It only need you to connect it to the computer, then you can print any pictures your like with your own creativity. Make of High quality aluminum alloy, Perfect gift for engraving DIY Artist. Engravable materials: light wood board, cardboard, kraft paper, cotton cloth, solid wood, bamboo, acrylic, etc. Cuttable materials: non-woven fabric, canvas, leather, etc. DIY CNC laser engraving machine- 500mw DIY desktop blue laser engraving machine, engraving and cutting. 240×190mm laser engraver area. Precise positioning Laser Engraver- 0.01mm Positioning Accuracy, Cross red light emitter assisted positioning, Low-damper rail modules and high-quality stepper motors ensure higher accuracy and better stability. High Power Laser Module Engraver- Blue purple light 500mw laser power engraving machine. High integration and good heat dissipation, Prolonging it using life greatly. Adjustable laser power, achieve all kinds of effects. EASY TO USE Laser Engraver- Compatible with Windows XP, WIN 7, WIN 8 and WIN10. Support offline function, you can customize the engraving pattern in batches. Laser power: Blue purple light 500mw. Main body material: Aluminum Alloy. Machine size: 350×285×195mm (13.8×11.2×7.7). Working arear: 240×190mm (9.5×7.5). Control system: GRBL (all software which support GRBL, include GRBLControl, grblcontroller, Universal, GcodSendeer), also support weidiao master. Applicable to WinXP, Win7, Win8, Win10. Gross weight: 4.1kg. Please wear the protective glass when you use the laser module. Do not touching the laser light directly in case that hurt the body and skin. Keep children and pets away from the laser module when it working. Please DO NOT disassemble the laser module without our permission, or it might cause the damage. 1 × Engraving machine. 1 × Protective Glasses. 1 × Power Adapter. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. At present, our company has warehouses in. If you are a U. Transport time will range from 2 to 4 workdays according to your location. Note: American regional AK, HI, PR , are remote areas, these places need to be extra charged. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. Portable Household Mini Heat Sealing Machine Sealer Impulse Plastic Poly Bag. Male to HDTV HDMI 1080P Cable Converter PC VGA for DVD Female Adapter Video. Healthy Kitchen Tools Bamboo Utensils Wooden Spatula Spoon Shovel Cooking. Meter Outlet 0-15V Panel DC Voltmeter New Voltage Factory Volt Analog. Gear wash Tool MTB Road Bike Chain Cycle Cleaning Brush Motorcycle Scrubber. Light Box 24 Circular Round LED Projecting Double Sided Blank Illuminated Sign. The item “2419 GRBL Laser Engraving Machine Wood Cutter DIY Carving Machine 500mw Laser” is in sale since Wednesday, August 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers”. The seller is “enjoyfactoryprice” and is located in City of Industry, California. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico, Australia.

• Applicable to: WinXP, Win7, Win8, Win10
• Brand: TaiShi
• Control: CNC
• Control system: GRBL
• Country/Region of Manufacture: China
• Gross weight: 4.5kg
• Input voltage: 12V
• Laser power: Blue purple light 500mw
• Machine size: 350×285×195mm (13.8×11.2×7.7″)
• Machine Type: Engraver Machine
• Main body material: Aluminum Alloy
• MPN: MG2020060430
• Working arear: 240×190mm (9.5×7.5″)

]]> https://woodcarvingsculpture.com/2020/12/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser-2/feed/ 0 https://woodcarvingsculpture.com/2020/09/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser/ https://woodcarvingsculpture.com/2020/09/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser/#comments Sat, 05 Sep 2020 01:41:13 +0000 http://woodcarvingsculpture.com/2020/09/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser/













2419 GRBL Laser Engraving Machine Wood Cutter DIY Carving Machine 500mw Laser. This DIY desktop blue laser engraving machine is ideal for amateur laser engraving usage. It only need you to connect it to the computer, then you can print any pictures your like with your own creativity. Make of High quality aluminum alloy, Perfect gift for engraving DIY Artist. Engravable materials: light wood board, cardboard, kraft paper, cotton cloth, solid wood, bamboo, acrylic, etc. Cuttable materials: non-woven fabric, canvas, leather, etc. DIY CNC laser engraving machine- 500mw DIY desktop blue laser engraving machine, engraving and cutting. 240×190mm laser engraver area. Precise positioning Laser Engraver- 0.01mm Positioning Accuracy, Cross red light emitter assisted positioning, Low-damper rail modules and high-quality stepper motors ensure higher accuracy and better stability. High Power Laser Module Engraver- Blue purple light 500mw laser power engraving machine. High integration and good heat dissipation, Prolonging it using life greatly. Adjustable laser power, achieve all kinds of effects. EASY TO USE Laser Engraver- Compatible with Windows XP, WIN 7, WIN 8 and WIN10. Support offline function, you can customize the engraving pattern in batches. Laser power: Blue purple light 500mw. Main body material: Aluminum Alloy. Machine size: 350×285×195mm (13.8×11.2×7.7). Working arear: 240×190mm (9.5×7.5). Control system: GRBL (all software which support GRBL, include GRBLControl, grblcontroller, Universal, GcodSendeer), also support weidiao master. Applicable to WinXP, Win7, Win8, Win10. Gross weight: 4.1kg. Please wear the protective glass when you use the laser module. Do not touching the laser light directly in case that hurt the body and skin. Keep children and pets away from the laser module when it working. Please DO NOT disassemble the laser module without our permission, or it might cause the damage. 1 × Engraving machine. 1 × Protective Glasses. 1 × Power Adapter. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. At present, our company has warehouses in. If you are a U. Note: American regional AK, HI, PR , are remote areas, these places need to be extra charged. But if your address is too remote to achieve, there will an extra remote surcharge occurs. Please also pay attention to that, thanks. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. 110V Jade Grinding Faceted Manipulator Gem Faceting Machine Jewel Angle Polisher. 58 in 1 Precision Screwdriver Set Repair Mobile Tool Kit for Laptop PC TOP. Manual Small Bottle Sticker Label Machine Round Bottle Labeling Machine. Labeling Machine Semi-Automatic Round Bottle Labeling Machine MT-50 Round Bottle. Professional DJ Confetti Launcher Machine Manual/RC/DMX Control 110V TOP. 10 Casting Fishing Rod Sleeves Pole Covers Protector Braided Rod Socks Gloves. The item “2419 GRBL Laser Engraving Machine Wood Cutter DIY Carving Machine 500mw Laser” is in sale since Friday, June 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers”. The seller is “industrytools2019″ and is located in City of Industry, California. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico, Australia.

• Applicable to: WinXP, Win7, Win8, Win10
• Brand: TaiShi
• Control: CNC
• Control system: GRBL
• Country/Region of Manufacture: China
• Gross weight: 4.5kg
• Input voltage: 12V
• Laser power: Blue purple light 500mw
• Machine size: 350×285×195mm (13.8×11.2×7.7″)
• Machine Type: Engraver Machine
• Main body material: Aluminum Alloy
• MPN: MG2020060430
• Working arear: 240×190mm (9.5×7.5″)

]]> https://woodcarvingsculpture.com/2020/09/2419-grbl-laser-engraving-machine-wood-cutter-diy-carving-machine-500mw-laser/feed/ 0 https://woodcarvingsculpture.com/2020/08/professional-diy-desktop-mini-laser-engraver-cutter-wood-carving-machine-router/ https://woodcarvingsculpture.com/2020/08/professional-diy-desktop-mini-laser-engraver-cutter-wood-carving-machine-router/#comments Fri, 07 Aug 2020 22:17:41 +0000 http://woodcarvingsculpture.com/2020/08/professional-diy-desktop-mini-laser-engraver-cutter-wood-carving-machine-router/












Women’s Clothing Acc. Men’s Clothing Acc. Professional DIY Desktop Mini Laser Engraver Cutter Wood Carving Machine Router. This laser engraving ma. Chine features the function of print carving and more practical than normal engraving machine. This mini laser engraving machine with high precision and high stability is great for DIY engraving. It supports offline operation, convenient than normal engraving machine. This laser engraving machine features the function of print carving and more practical than normal engraving machine. High precision and high stability: with 108 screws and alloy structure make it strong. Unique frame and weak light automatic positioning: frame positioning makes the image positioning easier. Offline operation: this machine supports operating without computer, only need to prestore a picture and connect the two usb ports to charger or power bank(not included); one button to operate. Professional power IC and radiator, carving time will last much longer and carving performance will be more stable than other laser. Adjustable blue laser head, high speed and support more types of materials. Items can be carved including: mahogany, bamboo, paper cards, ivory, leather, flammable plastic, PCBA, etc. Come with a pair of protective glasses to protect your eyes from getting hurt by laser. Wide application: can be used for print, hand tools and industrial processing. High resolution printing: 512512. What about the laser head life? Normally, about 3 months to 1 year, but it’s also closely related to how you use it. Main factors include: temperature, time intensity, current, voltage, anti static treatment, etc. How to judge the laser head burned? When the machine is working, the light was significantly weakened. When the machine is working, the light is scattered and weakened, and unable to focus. It can’t burn out the object when the burning time, carving material and focal length are right. It can not engrave metal, acrylic and any other retardant material. To prevent the laser head from burning out caused by overheating, please turn off the machine for at least 5mins after 30mins continuous working. Material: Acrylic + Aluminum + Stainless Steel. Laser Wave Length: 405nm. Image Size: 512 512 pixels. Image Engraving Pattern: Bitmap Engraving. Support System: Win7 / Win8 / XP / Win10. Supply Voltage: 4.2-5.5V. Work Area: 38 38mm. Item Size: 16 14.5 19cm / 6.30 5.71 7.48in. Item Weight: 976g / 34.43oz. Package Size: 30 20.5 21cm / 11.81 8.07 8.27in. Package Weight: 1641g / 57.88oz. 1 User Manual(English). We are not responsible for wrong or undeliverable address. Sometimes, items may be delayed by 5-10 days on special days such as Christmas. Thanks for you understanding. 6-8 weeks for some country: Peru/Croatia/ France / Germany / Eastern Europe / Brazil / South America. It is slowly due to strict Custom Inspection. The item “Professional DIY Desktop Mini Laser Engraver Cutter Wood Carving Machine Router” is in sale since Tuesday, November 5, 2019. This item is in the category “Business, Office & Industrial\Printing & Graphic Arts\Sign-Making”. The seller is “e_road_37″ and is located in zhejiang. This item can be shipped worldwide.

• Brand: Unbranded
• Type: Cutting Tool
• Unit Type: Unit
• Custom Bundle: No
• MPN: Does Not Apply
• Material: Acrylic
• Unit Quantity: 1
• Country/Region of Manufacture: China
• Lettering Type: Removable
• Modified Item: No

]]> https://woodcarvingsculpture.com/2020/08/professional-diy-desktop-mini-laser-engraver-cutter-wood-carving-machine-router/feed/ 0